BYWRD - PROCESS 94CD-LR COLOR DEVELOPER STARTER
- MSDS: BYWRD
- Manufacturer: MILES INC
- Product Name: PROCESS 94CD-LR COLOR DEVELOPER STARTER
- National Stock Number: 6750-00N063243
Product Identification
Product ID:PROCESS 94CD-LR COLOR DEVELOPER STARTER
MSDS Date:09/01/1993
FSC:6750
NIIN:00N063243
MSDS Number: BYWRD
Responsible Party
RIDGEFIELD PARK, NJ 07660
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 201-971-0260
Cage: MILES
Contractor
Telephone: 800-662-2927
Cage: MILES
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 80-85%
OSHA PEL N/K
ACGIH TLV: N/K
POTASSIUM BICARBONATE
CAS: 298-14-6
Fraction By Weight: 10-15%
OSHA PEL N/K
ACGIH TLV: N/K
POTASSIUM CHLORIDE
CAS: 7447-40-7
RTECS: TS8050000
Fraction By Weight: 5-10%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN CONTACT:MAY CAUSE IRRITATION.
INHALATION:NORMALLY NO PROBLEM, BUT INHALATION OF MIST COULD CAUSE
RESPIRATORY IRRITATION. INGESTION:MAY CAUSE IRRITATION OF THE
MUCOUS MEMBRANES OR DIGESTIVE TR ACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMEDIATELY FLUSH WITH PLENTY OF RUNNING WATER FOR AT
LEAST 15 MINUTES. OBTAIN MEDICAL ATTENTION. SKIN:FLUSH AFFECTED
AREAS PROMPTLY WITH WATER FOR 15 MINUTES. REMOVE CONTAMINATED
CLOTHING. IN CA SE OF CONTINUED IRRITATION CONSULT PHYSICIAN.
INHALATION:FOR OVER-EXPOSURE, REMOVE TO FRESH AIR. INGESTION:OBTAIN
IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:ANY APPLICABLE TO PRIMARY CAUSE OF FIRE.
Fire Fighting Procedures:EVACUATE PERSONNEL TO SAFE AREA. KEEP
PERSONNEL REMOVED AND UPWIND OF FIRE. WEAR NIOSH/MSHA APPROVED SCBA
& FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC GASES MAY BE EMITTED WHEN HEATED TO
DECOMPOSITION. SOME OF THESE MATERIALS MAY BURN BUT NONE OF THEM
IGNITES READILY.
Accidental Release
Spill Release Procedures:NOTE:REVIEW FIRE & EXPLO HAZ DATA & CTL
MEASURES BEFORE PROCEEDING W/CLEAN UP. USE APPROP PERS PROT EQUIP
DURING CLEAN UP. PVNT LIQ FROM ENTERING SEWERS, WATERWAYS/LOW
AREAS. SOAK UP W/SAWDUST, SAND, OIL DRY/OTHER ABSROB MATL.
Neutralizing Agent:SPILL MAY BE NEUTRALIZED WITH POWDERED CITRIC ACID.
Handling
Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT, AND STORE
IN WELL-VENTILATED AREA. KEEP CONTAINER TIGHTLY CLOSED. DO NOT
STORE W/INCOMPATIBLE MATLS (SEE MATLS TO AVOID).
Other Precautions:DO NOT STORE OR CONSUME FOOD, DRINK OR TOBACCO IN
AREA WHERE THEY MAY BECOME CONTAMINATED WITH THIS MATERIAL.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE NEEDED WHEN WORKING MIXTURES AND
NORMAL ROOM VENTILATION (10 CHANGES OF AIR PER HOUR).
Ventilation:ROOM VENT IS SUFFICIENT. AVOID USE OF PROD IN UNVENT AREAS.
ALWAYS CTL AIRBORNE LEVELS BELOW EXPOS GUIDELINES (SUP DAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:CHEMICAL-RESISTANT APRON. DISPOSABLE
COVERALLS ARE OPTIONAL, AND DISCARD AFTER USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH:DISCHARGE TO SEWER REQUIRES APPROVAL OF PERMITTING
AUTHORITY AND MAY REQUIRE PRETREATMENT. VENT:WHEN REPORTED IN
INGREDIENTS (USE 50% OF THE TLV).
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.128 (H*2O=1)
pH:8.4
Solubility in Water:100% (BY WEIGHT %)
Appearance and Odor:CLEAR AND COLORLESS LIQUID WITH NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NOT PERTINENT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NOT PERTINENT.
Disposal
Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS .
RECOVER NONUSABLE FREE LIQ &/OR CONTAM WATER, & DISP OF IN APPRVD &
PERMITTED TREATMENT SYS; INCIN IS REC. REMOVE NONUSABLE SOLID MATL
&/OR CONTAM SOIL , FOR DISP IN APPRVD & PERMITTED LANDFILL.(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.